488CA Printer - User's Guide

Media path

(view from

right)

2–20

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 2–20 (seq: 62)

This is the black on page 2–20 (seq: 62)

5 Wind the media from the roll, leaving plenty free, and hold it ready to load into the

printer. Hold the media near its edges, about 18 cm (7 in) from the top.

Don’t hold the media right at the top, as you would have to adjust your grip as you

push it into the printer, and this would probably make you misalign it.

6 Align the right-hand side of the media with the line of holes on the printer.

Working with media

Loading roll media

Localization Note.