488CA Printer - User's Guide

2–23

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–23 (seq: 65)

This is the black on page 2–23 (seq: 65)

11 Align the edges of the media coming out of the printer with the same edges going

into the printer, by pulling them taut with both hands and aligning them by eye.

Make sure that the right-hand side of the media is aligned with the line of holes on

the printer, and the roll. You may need to manually unroll a small amount of the

media from its roll, to align the sheet satisfactorily.

12 Raise the media lever.

MEDIA

Working with media

Loading roll media

Localization Note.