488CA Printer - User's Guide

2–24

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 2–24 (seq: 66)

This is the black on page 2–24 (seq: 66)

To load a sheet with the roll-feed option installed

From time to time you may want to load a separate sheet even though you

normally use a roll—for example, to use the Setup Sheet.

1 If a roll is currently loaded in the printer, unload it as explained on page 2–16, step

2a—c, remembering to raise the media lever again when it’s done.

2 On the front panel, make sure the

Sheet light is on, to indicate that you are going

to load a sheet.

3 Load the sheet as explained starting with step 4 on page 2–10.

Localization Note.

Working with media

To load a sheet with the roll-feed option installed

SHEET

MEDIA SOURCE

This is the green on page 2–24

(seq: 66)