488CA Printer - User's Guide

2–27

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 2–27 (seq: 69)

This is the black on page 2–27 (seq: 69)

To cut and unload a print from a roll

When the print is finished, the Ready light stops flashing and goes off.

Your printer includes a built-in cutter. The cutter automatically cuts the roll

between prints, unless you have disabled it through software or the setup sheet.

While the cutter is operating, keep your fingers away from the media entry

slot.

If the cutter has been disabled through software and you want to cut the roll:

1 Before cutting the roll, make sure that no other print has been sent to the printer.

2 Press the

Form Feed key. This activates the cutter.

MEDIA

Working with media

Unloading media

Localization Note.

CAUTION

READY

FORM FEED