488CA Printer - User's Guide

3–6

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 3–6 (seq: 76)

This is the black on page 3–6 (seq: 76)

Page size and clipped prints

When setting your page size, be aware that with some combinations of page size

and print size, the printer may print what it can, but may clip your print:

If you specify in your software a page/print size that is larger than the physical

size of the media loaded in the printer.

A2 media in the printer

A1 page size in software

Clipped area

If you specify in software a page size setting that is too small for the print, the

print will be clipped, even though the physical media size may be adequate.

If you specify a discrete page size in the Setup Sheet that is too small for the

print, the print may be clipped, even though the physical media size may be

adequate.

Physical roll media size

Clipped area

Page size specified in software

or in Setup Sheet

Full print size

Localization Note.

Page size

Controlling your print’s appearance