488CA Printer - User's Guide

3–7

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 3–7 (seq: 77)

This is the black on page 3–7 (seq: 77)

Rotating a print

Can you rotate any drawing using the Setup Sheet?

No. The Rotate option available in the Setup Sheet is applicable only if the file

contains no raster data.

The normal line drawings of most CAD software do not contain raster data, and

therefore you can use this

Rotate option. However, if you are using one of the

Microsoft Windows drivers supplied with this printer, your files do contain raster

data and therefore you cannot use this

Rotate option.

To rotate a print using the printer’s Setup Sheet

Providing your print file does not contain raster data, you can rotate a print using

the Setup Sheet, without changing the drawing in your software.

The available options are:

Auto rotate (roll media only). With this setting, the printer will automatically

rotate a print by 90_, providing it will fit on the available media, if this will save

media.

Rotate off. With this setting, the printer will print as requested by your

software, without adding any rotation. This is the default.

Rotate 90_. With this setting, the printer will rotate all prints by 90_,

counterclockwise relative to the drawing’s orientation in your software:

Rotate off Rotate 90_

Localization Note.

APPEARANCE

Rotating a print

Controlling your print’s appearance