488CA Printer - User's Guide

3–18

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 3–18 (seq: 88)

This is the black on page 3–18 (seq: 88)

Print quality recommendations

We advise that where possible you don’t use very large area fills with the

following media:

– Opaque Bond

– Translucent Bond

– Vellum.

This can cause cockle.

In Glossy media use

Best to obtain good quality.

Cartridges almost empty of ink can cause some kind of banding in imaging

prints.

When printing renders or GIS files in Best – Paper – Mono use the driver

setting Ret=Off in case you get banding in the printout.

For printing imaging files on Coated media always use

Best quality, otherwise

you can get banding in the printout.

Localization Note.

Controlling your print’s appearance

Print quality recommendations