488CA Printer - User's Guide

4–2

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 4–2 (seq: 90)

This is the black on page 4–2 (seq: 90)

To cancel a print

To cancel the current print while it is being received, or while it is printing, press

Cancel.

The canceled print stays in memory until you send another, and so you can

subsequently use Reprint to print it again. Note that, for these purposes, any

internal print (see chapter 5) counts as another print.

To copy a print

To print another copy of the last print, press Reprint.

It will be printed with the same settings for

Media Type and Print Quality as the

original copy, even if you’ve changed them on the front panel.

The following prevents

Reprint from working:

Another file has already been sent to the printer (including internal prints, for

example the Setup Sheet), or

You have switched the printer off and on again since first sending the print, or

Your file contains HP RTL data (which is mostly used for images) and it does

not completely fit into the memory of the printer.

Localization Note.

CANCEL

Managing your prints

To cancel a print / To copy a print

REPRINT