488CA Printer - User's Guide

4–3

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 4–3 (seq: 91)

This is the black on page 4–3 (seq: 91)

To advance the media

Pressing the Form Feed key advances the media out of the media exit slot, and if

roll-feed paper is loaded, cuts the paper.

You may want to do this:

When the printer is in continuous printing mode (that is, the automatic cutter

has been disabled through the software), you have reached the end of a series of

prints and want to cut the roll after the last one (see page 2–27), or

To eject damaged media after clearing a media jam (see page 9–5).

There is no need to use

Form Feed to unload a printed sheet from the printer—see

page 2–26.

Don’t press

Form Feed while a file is being received by the printer, as this

terminates the data transmission (unless you are doing this as part of a

troubleshooting routine—see page 9–9).

MANAGEMENT

Localization Note.

Managing your prints

To advance the media

FORM FEED