488CA Printer - User's Guide

5–4

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 5–4 (seq: 96)

This is the black on page 5–4 (seq: 96)

Using the Black Cartridge Alignment Sheet

Some of the circumstances in which it is useful to use the Black Cartridge

Alignment Sheet are explained in chapter 9, “Troubleshooting”. It tests the

alignment between the two horizontal cartridge movements—movement to the

right and movement to the left—and allows you to correct any misalignment. You

should run the test after installing a new cartridge.

1 Load a sheet of A-size or A4-size plain paper, in portrait orientation. Make sure

you have selected

Paper as the media type on the front panel (see page 2–3). For

this print, the printer sets the print quality level automatically.

Print will be on underside

For help on how to load a sheet, either refer to the pictures on the right-hand side

of the printer’s media-entry slot, or see the section starting on page 2–9. Note that

you cannot print the Black Cartridge Alignment Sheet on roll media. To load a

sheet with the the roll-feed option installed, see page 2–24.

Localization Note.

Special internal prints

Using the Black Cartridge Alignment Sheet