488CA Printer - User's Guide

5–5

Company confidential. Genie User’s Guide, Edition 2, First Draft. Freeze Status: open

This is the blue on page 5–5 (seq: 97)

This is the black on page 5–5 (seq: 97)

2 When you have correctly loaded the sheet (when the Ready light is on and steady),

press the

Setup and Form Feed keys simultaneously.

The Black Cartridge Alignment Sheet is printed. An example is shown on

page 5–7.

3 When the Load Media light comes on (not flashing), the print is finished. Simply

remove the sheet from the printer.

4 Follow the instructions on the sheet itself. As you will see, this involves you

identifying the straightest set of vertical lines in each of the two boxes.

5 If the straightest sets are already the current selection, indicated by thicker edges to

the ovals, you need do nothing more. If not, then mark the appropriate ovals,

reverse the sheet as indicated, and reload it.

Special internal prints

Using the Black Cartridge Alignment Sheet

INTERNAL

PRINTS

Localization Note.

SETUP FORM FEED CANCELREPLOT

LOAD MEDIA

This is the green on page 5–5

(seq: 97)