488CA Printer - User's Guide

5–6

Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open

This is the blue on page 5–6 (seq: 98)

This is the black on page 5–6 (seq: 98)

6 When the Ready light comes on, press Setup.

The printer now reads your marks and adjusts itself automatically.

7 When the

Load Media light comes on again, remove the sheet and make sure that

the printer has marked your selections with a check mark.

Three important points concerning the Black Cartridge Alignment procedure:

Always use the Black Cartridge Alignment Sheet immediately after printing it.

Never re-use a Black Cartridge Alignment Sheet.

Any print that was in the printer’s memory before you printed the Black

Cartridge Alignment Sheet has been lost and so, to print it, you must resend it.

Localization Note.

SETUP

READY

This is the green on page 5–6

(seq: 98)

LOAD MEDIA

This is the green on page 5–6

(seq: 98)

Special internal prints

Using the Black Cartridge Alignment Sheet