HP Designjet 4520 Printer series - Assembly Instructions: English

69 70 71 72
Remove the anti-slip material from the two rear
wheels on the stand assembly.
Remove the two foam end packs and the plastic
covering the printer.
Position the left leg cover on the front of the left
leg (1), then clip the rear edge (2) into place.
Position the right leg cover on the front of the
right leg (1), then clip the rear edge (2) into
place.
73 74 75 76
Open the printhead cleaner door (1) and
remove the carriage packing material (2). Then
close the cleaner door.
Remove the packing tapes 1 to 10. Open the printer window. Then remove the
two window inserts and the ink tube packing
material.
Remove the protective covering from the printer
window and the front panel screen.
CM768-900011.indd 10 03/02/2009 17:12:32