HP Designjet 4520 Printer series - Assembly Instructions: English

93 94 95 96
Wait (about a minute) until you see this front
panel message.
Push the ink cartridge drawer back into the
printer until it locks into position.
Following the same instructions, install the other
three ink cartridges.
Close the ink cartridge door.
97 98 99 100
Lift up the cover. This will give you access to the
setup printheads.
Open the printer window. Remove the packing tape that is holding down
the printhead carriage latch.
Pull up and release the latch on top of the
carriage assembly.
CM768-900011.indd 13 03/02/2009 17:12:36