HP Designjet 4520 Printer series - Assembly Instructions: English

125 126 127 128
Remove the blue-colored stop from the left end
of the spindle. Keep the spindle horizontal.
Remove spindle from Drawer 1. Shown above is one of the core adaptors
supplied. Use these when the roll core is of a
larger diameter.
Using two hands, pull out Drawer 1.
129 13 0 131 132
Push the blue left-hand stop onto the roll. Make
sure it is correctly seated.
Push the black right-hand stop onto the roll.
Make sure it is correctly seated.
Put the blue-colored stop onto the spindle.Slide a roll onto the spindle. Make sure the
paper is oriented exactly as shown.
CM768-900011.indd 17 03/02/2009 17:12:40