HP Designjet 4520 Printer series - Assembly Instructions: English
133 134 13 5 13 6
Feed the paper from roll 1 onto the drawer 1
platen. Align the paper parallel with the blue
lines on the right side of the platen. The paper
edge does not need to be aligned exactly with
a specic blue line, but between the two outer
lines.
With the blue stop on the left, lower the spindle
into Drawer 1.
Lift the blue lever on Drawer 1. This is located
on the righthand side of the printer and above
Drawer 1.
As shown above, hold the spindle assembly
using the blue and black stops.
137 13 8 139 14 0
Using the stops, carefully wind the excess
paper back on to the spindle.
Lower the blue lever for Drawer 1. Push in Drawer 1.Feed the paper for a few centimeters more after
the printer beeps, then turn the roller backwards
to tension the paper correctly.
CM768-900011.indd 18 03/02/2009 17:12:42