HP Designjet 4520 Printer series - Assembly Instructions: English

5 6 7 8
Remove the 2 lids. Lower the stand and bin box
onto the consumables and spare boxes. Then
lower the box onto the oor.
Place the consumables and spare boxes in front
of the printer body.
Lower the roll module box onto the consumables
and spare boxes. Then lower the box onto the
oor. Then remove the consumables and spare
boxes.
1
1
2
3
Fold up the two lids as shown, and remove the
consumables and spare boxes
x2 x2
9 10 11 12
Remove the rst tray containing the parts for
the bin.
Remove the main printer box. Remove the two packing pieces. When you are unpacking the stand assembly,
you will see that there is anti-slip material
around two of the wheels on the feet.
DO NOT REMOVE this material yet.
CM768-900011.indd 2 03/02/2009 17:12:25