HP Designjet 4520 Printer series - Assembly Instructions: English

13 14 15 16
You now need to identify which is the left and
the right side of the cross-brace.
Remove the second tray from the stand and bin
assembly box. This tray contains the stand legs.
From the second tray, remove the two boxes
marked with L and R. Place them on the oor as
shown.
Lower the cross-brace on to the L and R boxes.
2 holes
Left
Right
1 hole
17 18 19 20
Fix the left leg to the cross-brace using four
screws on the inner side of the leg.
Now you will need the bag of screws and the
screwdriver provided. You may notice that the
screwdriver is slightly magnetic.
Identify the left leg (A) and the right leg (B) as
shown above. Remove the two leg covers from
the left leg.
Lower the left leg onto the left side of the cross-
brace. The left leg will t only on the left side of
the cross-brace.
CM768-900011.indd 3 03/02/2009 17:12:25