HP Designjet 4520 Printer series - Assembly Instructions: English

21 22 23 24
Fix the right leg to the cross-brace using two
screws on the outer side of the leg.
Fix the left leg to the cross-brace using two
screws on the outer side of the leg.
Lower the right leg onto the right side of the
cross-brace. The right leg will t only on the right
side of the cross-brace.
Fix the right leg to the cross-brace using four
screws on the inner side of the leg.
25 26 27 28
Position a foot on the right leg. There are pins
to help you to position the foot correctly. Do not
remove the anti-slip material from the wheel.
Fix the stand cross-bar using four screws. Position a foot on the left leg. There are pins to
help you to position the foot correctly. Do not
remove the anti-slip material from the wheel.
Fix the left foot using four screws.
CM768-900011.indd 4 03/02/2009 17:12:26