HP Designjet 4520 Printer series - Assembly Instructions: English

29 30 31 32
Please take note of the colored plugs located
on the legs.
Fix the right foot using four screws. Turn the stand assembly into an upright position
as shown above.
Open the box containing the roll module. Re-
move the plastic bag containing the screws.
x2
Left Leg/Lang 2
Lang 3/Lang 4
Right Leg/Lang 2
Lang 3/Lang 4
33 34 35 36
Locate the pin into the right leg.Remove the blue plug on the left leg. Locate the pin into the left leg. Remove the blue plug on the right leg.
CM768-900011.indd 5 03/02/2009 17:12:27