HP Designjet 4520 Printer series - Assembly Instructions: English

61 62 63 64
Using four people, rotate the printer on to the
spare and consumables boxes.
Fix the roll module to the right leg of the stand. Fix the roll module to the left leg of the stand. Place the spare and consumables boxes against
the rear of the printer box. The arrows on the
boxes must point towards the printer box. Check
that the anti-slip material is still xed to the two
rear wheels.
x4
65 66 67 68
Rotate the printer into an upright position. The
anti-slip material should stop the printer from
sliding forwards.
Rotate the printer until its rear rests on the spare
and consumables boxes and the wheels with the
anti-slip material touch the oor.
Remove the pallet before trying to lift the printer
into an upright position.
Using four people and the hand holds on the
rear of the printer body, carefully lift the printer
into an upright position.
x4
CM768-900011.indd 9 03/02/2009 17:12:31