HP Designjet 9000s Printing Guide [PosterShop 6.5 for HP] - Printing with the Contour Cutting [Windows]

HP LF Printing Knowledge Center

Contour cutting

Printer: HP Designjet 9000s printer series

Software

: PosterShop 6.5 for HP

Operating System: Windows

PAGE 1
HP LF Printing Knowledge Center Contour cutting Printer: HP Designjet 9000s printer series Software: PosterShop 6.
PAGE 2
Contour cutting allows you to print an image and then use a specialized device to cut portions of that image. To do this, you prepare a file with a specialized spot color which acts as a cut path to determine where the image needs to be cut. The RIP will recognize this spot color and will draw a barcode and a number with instructions for the cutting device on how to cut it. 1.
PAGE 3
• Click OK until the RIP-Queue window. 5. Open your file, File menu > Open, browse to the location of your file and highlight it. 6. Choose the printer from the Printer drop-dawn menu and choose the Quick Set you have just created from the Quick Set drop-dawn menu. Click Open 7. Return to the RIP-Queue and check the preview, you can modify the job settings in the Change... or in the Preflight button. Print the job if the preview is correct. 8.
PAGE 4
For more information on HP Designjet products www.hp.com/go/designjet © 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.