HP Designjet L25500 Printer Series - Site preparation guide (second edition)

2 Site preparation requirements
Physical space requirements
Unloading route
The route between the unloading area of the printer and the installation site, including any corridors and
doorways through which the printer must be transported, is important to proper site preparation and must
be checked before the arrival of the printer. This pathway must be clear when the printer arrives.
Table 2-1 42-in printer physical specifications
Printer Packaging
Length 78 in (1.99 m) 87.91 in (2.23 m)
Width 27.5 in (0.69 m) 32.09 in (0.82 m)
Height 54 in (1.37 m) 47.44 in (1.21 m)
Weight 355 lb (161 kg) 550 lb (250 kg)
Table 2-2 60-in printer physical specifications
Printer Packaging
Length 97 in (2.47 m) 105.7 in (2.69 m)
Width 27.5 in (0.69 m) 32.09 in (0.82 m)
Height 54 in (1.37 m) 47.44 in (1.21 m)
Weight 399 lb (181 kg) 682 lb (310 kg)
Doorways: minimum width 40 in (1.01 m) x minimum height 66 in (1.67 m) required.
The space required for assembly is 10 ft (3 m) in front and 3.5 ft (1 m) at the sides and rear.
Most of the installation process requires one person, but four people are required to perform certain tasks.
2 Chapter 2 Site preparation requirements ENWW