Designjet T7200 42 in Production Printer Introductory Information
What is it? Your printer is a color inkjet printer designed for fast, high-quality printing, with a resolution of up to 2400 × 1200. •• Your printer is a color inkjet printer designed for printing high-quality images on paper up to 1067 mm (42 in) wide. •• Your printer is a color inkjet printer designed for fast, high-quality printing, with a resolution of up to 2400 × 1200 optimized dpi from a 1200 × 1200 dpi input (using the Max. resolution for photo papers option).
•• Do not disassemble or repair the printer yourself. Contact your local HP Service Representative for service, see Using your printer. •• Use only the electrical cord supplied by HP with the printer. Do not damage, cut or repair the power cord. A damaged power cord can cause fire or electric shock. Replace a damaged power cord with an HP-approved power cord. •• Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the printer.
12. OK key: to confirm an action while in a procedure or interaction. To enter in a submenu in the menu. To select a value when given an option. If the status screen is displayed, this key takes you to the main menu. 13. Status light: indicates the printer’s status. If the status light is solid green, the printer is ready. If it is flashing green, the printer is busy. If it is solid amber, there is a system error. If it is flashing amber, the printer needs attention.
Error message or code Recommendation 63.04 An input/output problem has occurred with the network card. Try the following remedies: •• Make sure that the network cable is correctly connected to the network card. •• Verify that your printer firmware is up to date. If the problem persists, contact HP Support. 81.01, 81.03, 86.01 Open the printer window and make sure that there are no obstacles restricting the movement of the drive roller.