HP LF Printing Knowledge Center Import profiles Printer: HP Designjet Z2100/Z3100 series
1. Open the EFI Designer Edition RIP. 2. Select the Add profile button: The EFI RIP prompts for information about the new paper, so that it can install your profile: • Paper name: Enter a name that will later be displayed for selection in EFI Designer Edition (ex. “HP Imaging Satin paper”). NOTE If the new paper profile you want to add in EFI Designer Edition is one of the front panel paper profiles, please, ensure that the Paper name is exactly the same which as displayed on the front panel.
For more information on HP Designjet products www.hp.com/go/designjet © 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
