HP Designjet Z3200ps Photo Printer Series - User Guide [English]
Table Of Contents
- Introduction
- Installing the software
- Personalizing the printer
- Turn the printer on and off
- Change the language of the front-panel display
- Access the HP Printer Utility
- Access the Embedded Web Server
- Change the language of the HP Printer Utility
- Change the language of the Embedded Web Server
- Password-protect the Embedded Web Server
- Set the date and time
- Change the sleep mode setting
- Turn the buzzer on and off
- Change the front-panel display contrast
- Change the units of measurement
- Configure network settings
- Change the graphic language setting
- Paper handling
- General advice
- Load a roll onto the spindle
- Load a roll into the printer
- Unload a roll
- Load a single sheet
- Unload a single sheet
- View information about the paper
- Paper presets
- Print on loaded paper
- Move the paper
- Maintain the paper
- Change the drying time
- Turn the automatic cutter on and off
- Feed and cut the paper
- Printing
- Create a print job
- Select print quality
- Select paper size
- Select margins options
- Print with shortcuts
- Rescale a print
- Preview a print
- Print a draft
- High-quality printing
- Print 16-bit color images
- Print in gray shades
- Print with no margins
- Rotate an image
- Print with crop lines
- Print on sheet paper
- Use paper economically
- Nest jobs to save roll paper
- Use ink economically
- Color management
- What is color?
- The problem: color in the computer world
- The solution: color management
- Color and your printer
- A summary of the color management process
- Color calibration
- Color profiling
- Color management options
- Perform black point compensation
- Set the rendering intent
- Color emulation
- HP Professional PANTONE Emulation
- Color adjustment options
- Color management scenarios
- Print a color photo for an exhibition (Photoshop, PS driver)
- Print a color photo for an exhibition (Photoshop, PCL3 driver)
- Print a black-and-white photo for an exhibition (Photoshop, PS driver)
- Print a black-and-white photo for an exhibition (Photoshop, PCL3 driver)
- Print a digital album (Aperture, PS driver)
- Print a digital album (Aperture, PCL3 driver)
- Proof the output on the monitor (InDesign, PS driver)
- Proof the output on the printer (QuarkXPress, PS driver)
- Job queue management
- Retrieving printer usage information
- Handling ink cartridges and printheads
- Maintaining the printer
- Accessories
- Troubleshooting paper issues
- The paper cannot be loaded successfully
- The paper type is not in the driver
- The paper has jammed
- Prints do not fall neatly into the basket
- The sheet stays in the printer when the print has been completed
- The paper is cut when the print has been completed
- The cutter does not cut well
- The roll is loose on the spindle
- A strip stays on the output tray and generates jams
- Recalibrate the paper advance
- Troubleshooting print-quality issues
- General advice
- Print quality troubleshooting wizard
- Horizontal lines across the image (banding)
- The whole image is blurry or grainy
- The paper is not flat
- The print is scuffed or scratched
- Ink marks on the paper
- Vertical dotted or dashed lines on the print
- Vertical continuous lines on the print
- Black ink comes off when you touch the print
- Edges of objects are stepped or not sharp
- Edges of objects are darker than expected
- Bronzing
- Horizontal lines at the end of a cut sheet print
- Vertical lines of different colors
- White spots on the print
- Colors are inaccurate
- The image is incomplete (clipped at the bottom)
- The image is clipped
- Some objects are missing from the printed image
- Lines are too thick, too thin or missing
- Lines appear stepped or jagged
- Lines print double or in the wrong colors
- Lines are discontinuous
- Lines are blurred
- The Image Diagnostics Print
- If you still have a problem
- Troubleshooting ink cartridge and printhead issues
- Troubleshooting general printer issues
- The printer does not print
- The printer seems slow
- Communication failures between computer and printer
- Cannot access the HP Printer Utility
- Some Color Center options are unavailable
- Cannot access the Embedded Web Server
- Automatic file system check
- No output when printing from Microsoft Visio 2003
- Unavailable driver features when printing from QuarkXPress
- Printer alerts
- Front-panel error messages
- HP Customer Care
- Printer specifications
- Glossary
- Index
Check printer status
You can check the current status of the printer in various ways:
●
If you start the HP Printer Utility, and select your printer, you see a page of information describing
the status of the printer and its paper and ink supplies.
●
If you access the Embedded Web Server, you see information about the general status of the
printer. The Supplies page in the Main tab describes the status of the paper and ink supplies.
●
The status screen of the printer's front panel notifies you of any current problems affecting the
printer as a whole. You can also request information about:
◦
The currently loaded paper, with the View loaded paper key
◦
The ink levels, with the View ink levels key
◦
The ink cartridges, by selecting the Ink menu icon
and then Ink cartridge information
◦
The printheads, by selecting the Ink menu icon
and then Printhead information
Clean the exterior of the printer
Clean the outside of the printer and all other parts of the printer that you regularly touch as part of normal
operation with a damp sponge or a soft cloth and a mild household cleaner such as non-abrasive liquid
soap.
WARNING! To avoid an electric shock, make sure that the printer is turned off and unplugged before
you clean it. Do not let water get inside the printer.
CAUTION: Do not use abrasive cleaners on the printer.
Replace the cutter
The cutter may need to be replaced once or twice during the life of the printer, depending on the total
amount and thickness of paper used. The front panel advises when replacement is due. If you do not
replace the cutter immediately, the printer continues working normally, but the front panel continues to
remind you about the cutter.
To replace the cutter:
1. If there is paper loaded in the printer, unload it.
2.
At the front panel, select the Setup menu icon
, then Resets > Reset cutter life counter.
3. After a brief pause, the printer turns itself off. The printhead carriage is parked on the right-hand
side of the printer, and the cutter on the left-hand side.
WARNING! There is a risk of electric shock if you attempt to replace the cutter with the printer
turned on.
124 Chapter 10 Maintaining the printer ENWW
Printer maintenance