HP Designjet Z3200ps Photo Printer Series - User Guide [English]
Table Of Contents
- Introduction
- Installing the software
- Personalizing the printer
- Turn the printer on and off
- Change the language of the front-panel display
- Access the HP Printer Utility
- Access the Embedded Web Server
- Change the language of the HP Printer Utility
- Change the language of the Embedded Web Server
- Password-protect the Embedded Web Server
- Set the date and time
- Change the sleep mode setting
- Turn the buzzer on and off
- Change the front-panel display contrast
- Change the units of measurement
- Configure network settings
- Change the graphic language setting
- Paper handling
- General advice
- Load a roll onto the spindle
- Load a roll into the printer
- Unload a roll
- Load a single sheet
- Unload a single sheet
- View information about the paper
- Paper presets
- Print on loaded paper
- Move the paper
- Maintain the paper
- Change the drying time
- Turn the automatic cutter on and off
- Feed and cut the paper
- Printing
- Create a print job
- Select print quality
- Select paper size
- Select margins options
- Print with shortcuts
- Rescale a print
- Preview a print
- Print a draft
- High-quality printing
- Print 16-bit color images
- Print in gray shades
- Print with no margins
- Rotate an image
- Print with crop lines
- Print on sheet paper
- Use paper economically
- Nest jobs to save roll paper
- Use ink economically
- Color management
- What is color?
- The problem: color in the computer world
- The solution: color management
- Color and your printer
- A summary of the color management process
- Color calibration
- Color profiling
- Color management options
- Perform black point compensation
- Set the rendering intent
- Color emulation
- HP Professional PANTONE Emulation
- Color adjustment options
- Color management scenarios
- Print a color photo for an exhibition (Photoshop, PS driver)
- Print a color photo for an exhibition (Photoshop, PCL3 driver)
- Print a black-and-white photo for an exhibition (Photoshop, PS driver)
- Print a black-and-white photo for an exhibition (Photoshop, PCL3 driver)
- Print a digital album (Aperture, PS driver)
- Print a digital album (Aperture, PCL3 driver)
- Proof the output on the monitor (InDesign, PS driver)
- Proof the output on the printer (QuarkXPress, PS driver)
- Job queue management
- Retrieving printer usage information
- Handling ink cartridges and printheads
- Maintaining the printer
- Accessories
- Troubleshooting paper issues
- The paper cannot be loaded successfully
- The paper type is not in the driver
- The paper has jammed
- Prints do not fall neatly into the basket
- The sheet stays in the printer when the print has been completed
- The paper is cut when the print has been completed
- The cutter does not cut well
- The roll is loose on the spindle
- A strip stays on the output tray and generates jams
- Recalibrate the paper advance
- Troubleshooting print-quality issues
- General advice
- Print quality troubleshooting wizard
- Horizontal lines across the image (banding)
- The whole image is blurry or grainy
- The paper is not flat
- The print is scuffed or scratched
- Ink marks on the paper
- Vertical dotted or dashed lines on the print
- Vertical continuous lines on the print
- Black ink comes off when you touch the print
- Edges of objects are stepped or not sharp
- Edges of objects are darker than expected
- Bronzing
- Horizontal lines at the end of a cut sheet print
- Vertical lines of different colors
- White spots on the print
- Colors are inaccurate
- The image is incomplete (clipped at the bottom)
- The image is clipped
- Some objects are missing from the printed image
- Lines are too thick, too thin or missing
- Lines appear stepped or jagged
- Lines print double or in the wrong colors
- Lines are discontinuous
- Lines are blurred
- The Image Diagnostics Print
- If you still have a problem
- Troubleshooting ink cartridge and printhead issues
- Troubleshooting general printer issues
- The printer does not print
- The printer seems slow
- Communication failures between computer and printer
- Cannot access the HP Printer Utility
- Some Color Center options are unavailable
- Cannot access the Embedded Web Server
- Automatic file system check
- No output when printing from Microsoft Visio 2003
- Unavailable driver features when printing from QuarkXPress
- Printer alerts
- Front-panel error messages
- HP Customer Care
- Printer specifications
- Glossary
- Index
Paper type g/m² Length Width Part numbers
Coated Paper 90 150 ft = 45.7 m
16.54 in = 420 mm Q1443A (J)
23.39 in = 594 mm Q1442A (EJ)
24 in = 610 mm C6019B
33.11 in = 841 mm Q1441A (EJ)
36 in = 914 mm C6020B
42 in = 1067 mm C6567B
300 ft = 91.4 m 36 in = 914 mm C6980A
Inkjet Coated Paper 90 150 ft = 45.7 m 18 in = 458 mm Q7897A (ELN)
Universal Coated Paper 95 150 ft = 45.7 m 24 in = 610 mm Q1404A (AEJN)
36 in = 914 mm Q1405A (AEJN)
42 in = 1067 mm Q1406A
Bright White Inkjet Bond Paper 90 150 ft = 45.7 m 16.54 in = 420 mm Q1446A (J)
23.39 in = 594 mm Q1445A (EJ)
24 in = 610 mm C1860A (LN),
C6035A (AEJ)
33.11 in = 841 mm Q1444A (EJ)
36 in = 914 mm C1861A (LN),
C6036A (AEJ)
300 ft = 91.4 m 36 in = 914 mm C6810A
Universal Bond Paper 80 150 ft = 45.7 m 23.39 in = 594 mm Q8003A (AJ)
24 in = 610 mm Q1396A
36 in = 914 mm Q1397A
42 in = 1067 mm Q1398A
Fluorescent Yellow Coloured Paper 100 150 ft = 45.7 m 36 in = 914 mm Q1757A (E)
Yellow Coloured Paper 92 150 ft = 45.7 m 23.39 in = 594 mm Q6596A (E)
36 in = 914 mm Q1760A (EN)
Technical Paper
Natural Tracing Paper
90 150 ft = 45.7 m 16.54 in = 420 mm Q1440A (J)
23.39 in = 594 mm Q1439A (J)
24 in = 610 mm C3869A
33.11 in = 841 mm Q1438A (J)
36 in = 914 mm C3868A
Translucent Bond Paper 67 150 ft = 45.7 m 24 in = 610 mm C3860A (AJN)
36 in = 914 mm C3859A (LN)
Vellum Paper 75 150 ft = 45.7 m 24 in = 610 mm C3862A (N)
36 in = 914 mm C3861A (LN)
Film (Technical and Graphic)
Table 11-3 Roll paper (continued)
ENWW How to order supplies and accessories 135
Accessories