HP Designjet Z3200ps Photo Printer Series - User Guide [English]
Table Of Contents
- Introduction
- Installing the software
- Personalizing the printer
- Turn the printer on and off
- Change the language of the front-panel display
- Access the HP Printer Utility
- Access the Embedded Web Server
- Change the language of the HP Printer Utility
- Change the language of the Embedded Web Server
- Password-protect the Embedded Web Server
- Set the date and time
- Change the sleep mode setting
- Turn the buzzer on and off
- Change the front-panel display contrast
- Change the units of measurement
- Configure network settings
- Change the graphic language setting
- Paper handling
- General advice
- Load a roll onto the spindle
- Load a roll into the printer
- Unload a roll
- Load a single sheet
- Unload a single sheet
- View information about the paper
- Paper presets
- Print on loaded paper
- Move the paper
- Maintain the paper
- Change the drying time
- Turn the automatic cutter on and off
- Feed and cut the paper
- Printing
- Create a print job
- Select print quality
- Select paper size
- Select margins options
- Print with shortcuts
- Rescale a print
- Preview a print
- Print a draft
- High-quality printing
- Print 16-bit color images
- Print in gray shades
- Print with no margins
- Rotate an image
- Print with crop lines
- Print on sheet paper
- Use paper economically
- Nest jobs to save roll paper
- Use ink economically
- Color management
- What is color?
- The problem: color in the computer world
- The solution: color management
- Color and your printer
- A summary of the color management process
- Color calibration
- Color profiling
- Color management options
- Perform black point compensation
- Set the rendering intent
- Color emulation
- HP Professional PANTONE Emulation
- Color adjustment options
- Color management scenarios
- Print a color photo for an exhibition (Photoshop, PS driver)
- Print a color photo for an exhibition (Photoshop, PCL3 driver)
- Print a black-and-white photo for an exhibition (Photoshop, PS driver)
- Print a black-and-white photo for an exhibition (Photoshop, PCL3 driver)
- Print a digital album (Aperture, PS driver)
- Print a digital album (Aperture, PCL3 driver)
- Proof the output on the monitor (InDesign, PS driver)
- Proof the output on the printer (QuarkXPress, PS driver)
- Job queue management
- Retrieving printer usage information
- Handling ink cartridges and printheads
- Maintaining the printer
- Accessories
- Troubleshooting paper issues
- The paper cannot be loaded successfully
- The paper type is not in the driver
- The paper has jammed
- Prints do not fall neatly into the basket
- The sheet stays in the printer when the print has been completed
- The paper is cut when the print has been completed
- The cutter does not cut well
- The roll is loose on the spindle
- A strip stays on the output tray and generates jams
- Recalibrate the paper advance
- Troubleshooting print-quality issues
- General advice
- Print quality troubleshooting wizard
- Horizontal lines across the image (banding)
- The whole image is blurry or grainy
- The paper is not flat
- The print is scuffed or scratched
- Ink marks on the paper
- Vertical dotted or dashed lines on the print
- Vertical continuous lines on the print
- Black ink comes off when you touch the print
- Edges of objects are stepped or not sharp
- Edges of objects are darker than expected
- Bronzing
- Horizontal lines at the end of a cut sheet print
- Vertical lines of different colors
- White spots on the print
- Colors are inaccurate
- The image is incomplete (clipped at the bottom)
- The image is clipped
- Some objects are missing from the printed image
- Lines are too thick, too thin or missing
- Lines appear stepped or jagged
- Lines print double or in the wrong colors
- Lines are discontinuous
- Lines are blurred
- The Image Diagnostics Print
- If you still have a problem
- Troubleshooting ink cartridge and printhead issues
- Troubleshooting general printer issues
- The printer does not print
- The printer seems slow
- Communication failures between computer and printer
- Cannot access the HP Printer Utility
- Some Color Center options are unavailable
- Cannot access the Embedded Web Server
- Automatic file system check
- No output when printing from Microsoft Visio 2003
- Unavailable driver features when printing from QuarkXPress
- Printer alerts
- Front-panel error messages
- HP Customer Care
- Printer specifications
- Glossary
- Index
Message Recommendation
Replace [color] cartridge Replace the cartridge. See Handling ink cartridges and
printheads on page 112.
Reseat [color] cartridge Remove and reinsert the same cartridge. See Handling ink
cartridges and printheads on page 112.
Update: failed. Invalid file Make sure that you have selected the correct firmware update
file. Then try again to perform the update.
Table 16-2 Numerical error codes
Error code Recommendation
52:01 The printer needs internal cleaning. See Clean the printhead drop detector on page 170. If the
problem persists, contact HP Support. See
Contact HP Support on page 185.
61:01 The file format is wrong and the printer cannot process the job. Check the graphic language
setting of your printer (see
Change the graphic language setting on page 23). If you are sending
PostScript from Mac OS over a USB connection, select ASCII encoding in both the driver and
the application. Check for the latest firmware and driver releases.
62, 63, 64, 65, 67 Check that the printer cables are well connected and the USB cable is of good quality. Try again
to print the same file. Make sure you are using the correct driver for your printer. Update your
printer's firmware. See
Update the firmware on page 129.
74.1 Try the firmware update again. If possible, try to update over a network if the USB update failed.
Do not try to use your computer while the update is in progress. If the problem persists, contact
HP Support. See
Contact HP Support on page 185.
75 A printer maintenance kit is required. See Printer maintenance kits on page 130.
78 You may be trying to print borderless on a paper type that does not support it. See Print with
no margins on page 56.
79 Restart the printer. If the problem persists, update your printer's firmware. See Update the
firmware on page 129. If the problem still persists, contact HP Support. See Contact HP
Support on page 185.
81, 86, 87 There may be a paper jam. See The paper has jammed on page 145. If the problem persists,
contact HP Support. See
Contact HP Support on page 185.
94, 94.1 Restart color calibration. See Color calibration on page 69.
98 There may be a printhead problem. See Troubleshooting ink cartridge and printhead issues
on page 167.
any other codes Restart the printer. If the problem persists, contact HP Support. See Contact HP Support
on page 185.
Table 16-1 Text messages (continued)
182 Chapter 16 Front-panel error messages ENWW
Front-panel errors