HP Designjet Z3200ps Photo Printer Series - User Guide [English]
Table Of Contents
- Introduction
- Installing the software
- Personalizing the printer
- Turn the printer on and off
- Change the language of the front-panel display
- Access the HP Printer Utility
- Access the Embedded Web Server
- Change the language of the HP Printer Utility
- Change the language of the Embedded Web Server
- Password-protect the Embedded Web Server
- Set the date and time
- Change the sleep mode setting
- Turn the buzzer on and off
- Change the front-panel display contrast
- Change the units of measurement
- Configure network settings
- Change the graphic language setting
- Paper handling
- General advice
- Load a roll onto the spindle
- Load a roll into the printer
- Unload a roll
- Load a single sheet
- Unload a single sheet
- View information about the paper
- Paper presets
- Print on loaded paper
- Move the paper
- Maintain the paper
- Change the drying time
- Turn the automatic cutter on and off
- Feed and cut the paper
- Printing
- Create a print job
- Select print quality
- Select paper size
- Select margins options
- Print with shortcuts
- Rescale a print
- Preview a print
- Print a draft
- High-quality printing
- Print 16-bit color images
- Print in gray shades
- Print with no margins
- Rotate an image
- Print with crop lines
- Print on sheet paper
- Use paper economically
- Nest jobs to save roll paper
- Use ink economically
- Color management
- What is color?
- The problem: color in the computer world
- The solution: color management
- Color and your printer
- A summary of the color management process
- Color calibration
- Color profiling
- Color management options
- Perform black point compensation
- Set the rendering intent
- Color emulation
- HP Professional PANTONE Emulation
- Color adjustment options
- Color management scenarios
- Print a color photo for an exhibition (Photoshop, PS driver)
- Print a color photo for an exhibition (Photoshop, PCL3 driver)
- Print a black-and-white photo for an exhibition (Photoshop, PS driver)
- Print a black-and-white photo for an exhibition (Photoshop, PCL3 driver)
- Print a digital album (Aperture, PS driver)
- Print a digital album (Aperture, PCL3 driver)
- Proof the output on the monitor (InDesign, PS driver)
- Proof the output on the printer (QuarkXPress, PS driver)
- Job queue management
- Retrieving printer usage information
- Handling ink cartridges and printheads
- Maintaining the printer
- Accessories
- Troubleshooting paper issues
- The paper cannot be loaded successfully
- The paper type is not in the driver
- The paper has jammed
- Prints do not fall neatly into the basket
- The sheet stays in the printer when the print has been completed
- The paper is cut when the print has been completed
- The cutter does not cut well
- The roll is loose on the spindle
- A strip stays on the output tray and generates jams
- Recalibrate the paper advance
- Troubleshooting print-quality issues
- General advice
- Print quality troubleshooting wizard
- Horizontal lines across the image (banding)
- The whole image is blurry or grainy
- The paper is not flat
- The print is scuffed or scratched
- Ink marks on the paper
- Vertical dotted or dashed lines on the print
- Vertical continuous lines on the print
- Black ink comes off when you touch the print
- Edges of objects are stepped or not sharp
- Edges of objects are darker than expected
- Bronzing
- Horizontal lines at the end of a cut sheet print
- Vertical lines of different colors
- White spots on the print
- Colors are inaccurate
- The image is incomplete (clipped at the bottom)
- The image is clipped
- Some objects are missing from the printed image
- Lines are too thick, too thin or missing
- Lines appear stepped or jagged
- Lines print double or in the wrong colors
- Lines are discontinuous
- Lines are blurred
- The Image Diagnostics Print
- If you still have a problem
- Troubleshooting ink cartridge and printhead issues
- Troubleshooting general printer issues
- The printer does not print
- The printer seems slow
- Communication failures between computer and printer
- Cannot access the HP Printer Utility
- Some Color Center options are unavailable
- Cannot access the Embedded Web Server
- Automatic file system check
- No output when printing from Microsoft Visio 2003
- Unavailable driver features when printing from QuarkXPress
- Printer alerts
- Front-panel error messages
- HP Customer Care
- Printer specifications
- Glossary
- Index
Glossary
AppleTalk A suite of protocols that Apple Computer developed in 1984 for computer networking, not supported
by this printer. Apple now recommends TCP/IP networking instead.
Bonjour Apple Computer's trade name for its implementation of the IETF Zeroconf specification framework, a
computer network technology used in Apple's Mac OS X from version 10.2 onwards. It is used to discover services
available on a local area network. It was originally known as Rendezvous.
Color accuracy The ability to print colors that match the original image as closely as possible, bearing in mind
that all devices have a limited color gamut and may not be physically capable of matching certain colors precisely.
Color consistency The ability to print the same colors from a particular print job from print to print and from
printer to printer.
Color model A system of representing colors by numbers, such as RGB or CMYK.
Color space A color model in which each color is represented by a specific set of numbers. Many different color
spaces can use the same color model: for instance, monitors generally use the RGB color model, but they have
different color spaces, because a particular set of RGB numbers results in different colors on different monitors.
Cutter A printer component that slides back and forth across the platen to cut the paper.
ESD ElectroStatic Discharge. Static electricity is common in daily life. It is the spark when touching the car door,
or the cling of clothing. Although controlled static electricity has some useful applications, uncontrolled electrostatic
discharges are one of the main hazards to the electronics products. Therefore, to prevent damage some
precautions are needed when setting up the product, or handling ESD sensitive devices. This type of damage may
reduce the life expectancy of the device. One way to minimize uncontrolled ESDs, and therefore reduce this type
of damage is by touching any exposed grounded part of the product (mainly metal parts) before handling ESD
sensitive devices (such as the printheads or ink cartridges). Additionally, to reduce the generation of electrostatic
charge in your body try to avoid working in a carpeted area, and keep your body movements to a minimum when
handling ESD sensitive devices. Also, avoid working in low humidity environments.
Ethernet A popular computer networking technology for local area networks.
Firmware Software that controls your printer's functionality and is stored semi-permanently in the printer (it can
be updated).
Gamut The range of colors and density values reproducible on an output device, such as a printer or monitor.
Gloss enhancer A clear fluid that improves gloss uniformity and eliminates bronzing as an image quality issue
on photo papers. It is not used on matte papers.
I/O Input/Output: this term describes the passing of data between one device and another.
ICC The International Color Consortium, a group of companies that have agreed on a common standard for color
profiles.
Ink cartridge A removable printer component that stores ink of a particular color and provides it to the printhead.
IP address A unique identifier that identifies a particular node on a TCP/IP network. It consists of four integers
separated by dots.
ENWW Glossary 191