HP Designjet Z3200ps Photo Printer Series - User Guide [English]

●
On the Embedded Web Server's Submit Job page: select Basic settings > Print quality. If you
then select Standard options, you can choose between Speed and Quality. If you select Custom
options, you will see the more specific options described above.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Print
quality.
NOTE: If you have set the print quality from your computer, that overrides the print-quality setting
in the front panel.
NOTE: You cannot change the print quality of pages that the printer is already receiving or has already
received (even if they have not started to print yet).
Select paper size
The paper size can be specified in the following ways.
NOTE: The paper size specified here should be the paper size in which the document was created.
It is possible to rescale the document to a different size for printing. See
Rescale a print on page 50.
●
In the Windows driver dialog: select the Paper/Quality tab, then select your paper size from the
Document Size list.
●
In the Mac OS Page Setup dialog: select your printer in the Format for popup menu, then Paper
Size.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Page
size > Standard.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Paper >
Select paper size.
NOTE: If you have set the paper size from your computer, that overrides the paper size setting
in the front panel.
NOTE: If you selected Sheet, without skew check when loading the paper, the paper length is
estimated as four times the width.
TIP: If your document is 13 × 19 in (33 × 48 cm), designed to fit on sheet paper of the same size, select
the document size Super B/A3.
Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
●
Under Windows, there are three different ways:
◦
In the driver dialog, press the Custom button in the Paper/Quality tab, then specify the name
and the dimensions of your new paper size, then click Save to save your new paper size. In
the PostScript driver, to see your new custom size in the list of custom sizes, you need to exit
the printer properties, then reenter them (and use the More button if necessary).
NOTE: The driver will not allow you to create a paper size whose width exceeds its length.
◦
From the Start menu, select Printers and Faxes, then from the File menu select Server
Properties. In the Forms tab, check the Create a new form box, specify the name and
dimensions of the new form, then click Save Form.
◦
The PostScript driver offers a special way of defining a custom paper size for the current
session only. Select the Advanced tab, then Paper/Output > Paper Size. Select PostScript
48 Chapter 5 Printing ENWW
Printing