HP Designjet Z3200ps Photo Printer Series - User Guide [English]
Table Of Contents
- Introduction
- Installing the software
- Personalizing the printer
- Turn the printer on and off
- Change the language of the front-panel display
- Access the HP Printer Utility
- Access the Embedded Web Server
- Change the language of the HP Printer Utility
- Change the language of the Embedded Web Server
- Password-protect the Embedded Web Server
- Set the date and time
- Change the sleep mode setting
- Turn the buzzer on and off
- Change the front-panel display contrast
- Change the units of measurement
- Configure network settings
- Change the graphic language setting
- Paper handling
- General advice
- Load a roll onto the spindle
- Load a roll into the printer
- Unload a roll
- Load a single sheet
- Unload a single sheet
- View information about the paper
- Paper presets
- Print on loaded paper
- Move the paper
- Maintain the paper
- Change the drying time
- Turn the automatic cutter on and off
- Feed and cut the paper
- Printing
- Create a print job
- Select print quality
- Select paper size
- Select margins options
- Print with shortcuts
- Rescale a print
- Preview a print
- Print a draft
- High-quality printing
- Print 16-bit color images
- Print in gray shades
- Print with no margins
- Rotate an image
- Print with crop lines
- Print on sheet paper
- Use paper economically
- Nest jobs to save roll paper
- Use ink economically
- Color management
- What is color?
- The problem: color in the computer world
- The solution: color management
- Color and your printer
- A summary of the color management process
- Color calibration
- Color profiling
- Color management options
- Perform black point compensation
- Set the rendering intent
- Color emulation
- HP Professional PANTONE Emulation
- Color adjustment options
- Color management scenarios
- Print a color photo for an exhibition (Photoshop, PS driver)
- Print a color photo for an exhibition (Photoshop, PCL3 driver)
- Print a black-and-white photo for an exhibition (Photoshop, PS driver)
- Print a black-and-white photo for an exhibition (Photoshop, PCL3 driver)
- Print a digital album (Aperture, PS driver)
- Print a digital album (Aperture, PCL3 driver)
- Proof the output on the monitor (InDesign, PS driver)
- Proof the output on the printer (QuarkXPress, PS driver)
- Job queue management
- Retrieving printer usage information
- Handling ink cartridges and printheads
- Maintaining the printer
- Accessories
- Troubleshooting paper issues
- The paper cannot be loaded successfully
- The paper type is not in the driver
- The paper has jammed
- Prints do not fall neatly into the basket
- The sheet stays in the printer when the print has been completed
- The paper is cut when the print has been completed
- The cutter does not cut well
- The roll is loose on the spindle
- A strip stays on the output tray and generates jams
- Recalibrate the paper advance
- Troubleshooting print-quality issues
- General advice
- Print quality troubleshooting wizard
- Horizontal lines across the image (banding)
- The whole image is blurry or grainy
- The paper is not flat
- The print is scuffed or scratched
- Ink marks on the paper
- Vertical dotted or dashed lines on the print
- Vertical continuous lines on the print
- Black ink comes off when you touch the print
- Edges of objects are stepped or not sharp
- Edges of objects are darker than expected
- Bronzing
- Horizontal lines at the end of a cut sheet print
- Vertical lines of different colors
- White spots on the print
- Colors are inaccurate
- The image is incomplete (clipped at the bottom)
- The image is clipped
- Some objects are missing from the printed image
- Lines are too thick, too thin or missing
- Lines appear stepped or jagged
- Lines print double or in the wrong colors
- Lines are discontinuous
- Lines are blurred
- The Image Diagnostics Print
- If you still have a problem
- Troubleshooting ink cartridge and printhead issues
- Troubleshooting general printer issues
- The printer does not print
- The printer seems slow
- Communication failures between computer and printer
- Cannot access the HP Printer Utility
- Some Color Center options are unavailable
- Cannot access the Embedded Web Server
- Automatic file system check
- No output when printing from Microsoft Visio 2003
- Unavailable driver features when printing from QuarkXPress
- Printer alerts
- Front-panel error messages
- HP Customer Care
- Printer specifications
- Glossary
- Index
the most common standards for the different devices. Apart from selecting the appropriate ICC profile,
you should select the appropriate rendering intent depending on the type of print: business presentation,
photography or proof. See
Set the rendering intent on page 75.
The options are as follows.
CMYK color emulation
A traditional workflow defines color in the CMYK space. For best results, the colors must be adjusted
to the printer, because different printers will produce different colors from the same CMYK data. If the
image file you are printing was not created specifically for your HP Designjet printer, it will require some
readjustment, which can be done using one of the following options provided with your printer.
All CMYK emulation options apply to PDF, PostScript, TIFF and JPEG files only.
●
None (Native): no emulation. The printer will use its default internal conversion from CMYK to
RGB, without following any color standard. This does not imply that results will be bad
●
U.S. Sheetfed Coated 2 uses specifications designed to produce quality separations using U.S.
inks under the following printing conditions: 350% total area of ink coverage, negative plate, bright
white offset stock.
●
U.S. Sheetfed Uncoated 2 uses specifications designed to produce quality separations using U.S.
inks under the following printing conditions: 260% total area of ink coverage, negative plate,
uncoated white offset stock.
●
U.S. Web Coated (SWOP) 2 uses specifications designed to produce quality separations using
U.S. inks under the following printing conditions: 300% total area of ink coverage, negative plate,
coated publication-grade stock.
●
U.S. Web Uncoated 2 uses specifications designed to produce quality separations using U.S. inks
under the following printing conditions: 260% total area of ink coverage, negative plate, uncoated
white offset stock.
●
Europe ISO Coated FOGRA27 is designed to produce quality separations for standard ISO 12647
printing under the following printing conditions: 350% total ink coverage, positive film, coated paper.
●
Euroscale Uncoated 2 uses specifications designed to produce quality separations using
Euroscale inks under the following printing conditions: 260% total area of ink coverage, positive
plate, uncoated white offset stock.
●
JMPA: Japanese standard for offset press
●
Japan Color 2001 Coated uses the Japan Color 2001 specification for type 3 (coated) paper. It
is designed to produce quality separations using 350% total ink coverage, positive film and coated
paper.
●
Japan Color 2001 Uncoated uses the Japan Color 2001 specification for type 4 (uncoated) paper.
It is designed to produce quality separations using 310% total ink coverage, positive film and
uncoated paper.
●
Japan Color 2002 Newspaper uses the Japan Color 2002 for Newspapers specification. It is
designed to produce quality separations using 240% total ink coverage, positive film and standard
newsprint paper.
●
Japan Web Coated (Ad) uses specifications developed by the Japan Magazine Publisher
Association for digital proofing of images in the Japanese magazine/advertising market.
●
Toyo is designed to produce quality separations for Toyo printing presses.
●
DIC is designed to produce quality separations for Dainippon Ink Company printing presses.
76 Chapter 6 Color management ENWW
Color management