User's Guide - (Macintosh OS X)

Guidelines
● Do not print borderless photos in ink-backup mode. Always have two print
cartridges installed in the printer.
● Open the file in a software program and assign the photo size. Ensure that the
size corresponds to the paper size on which you want to print the photo.
● For maximum fade resistance, use HP Premium Plus Photo Paper.
● Verify that the photo paper that you are using is flat. For information about
preventing photo paper from curling, see the photo paper storage instructions.
● Do not exceed the paper tray capacity: 15 sheets of photo paper.
Prepare to print
Show me how to load photo paper.
1. Slide the paper guide to the left.
2. Place the photo paper in the right side of the tray. The side to be printed on
should face down and the short edge should point towards the printer.
If you are using photo paper that has a tear-off tab, verify that the tab is pointing
away from the printer. Push the paper into the printer until it stops.
Note Some panoramic paper sizes might extend beyond the edge of the
paper tray.
3. Slide the paper guide firmly against the edge of the paper.
Print
1. Open the Page Setup dialog box.
Chapter 5
12 HP Deskjet 3900 series