Installing Microsoft Windows on an HP ProBook or EliteBook Notebook PC and creating an image whitepaper

5. As shown in Figure 3, make the following changes to the sysprep.xml file:
– In the Microsoft-Windows-PnpCustomizationsNonWinPE component –
Set the PnP driver search path.
– In the Microsoft-Windows-Deployment component –
Following the pass=”auditUser” phase, set Reseal in OOBE mode.
– In the Microsoft-Windows-Shell-Setup component –
Set up the Authentec Fingerprint Driver, HP Quick Launch Buttons, Intel Matrix Storage
Manager, and HP Multi-WWAN Driver Installer (for more information, refer to Figure 1
).
Silence the install command after passing the OOBE phase.
Note
Figure 3 does not show the complete sysprep.xml file.