HP StorageWorks Management Pack for System Center Operations Manager 2007 Installation and User Guide

Installation prerequisites for HP Storage Management Pack
Table 2 lists the software components that you must install before installing the HP Storage Management
Pack.
Table 2 Installation prerequisites
Location of softwareSoftware
It is the system where OpsMgr 2007 is installed.
It can also be installed on a machine which acts as a collection point
with the agent installed on it.
.NET Framework 1.1, 2.0, or later
It is on the Root Management Server.OpsMgr 2007 with SQL Server
It is in your storage environment.
For more information, see Installing WEBES/SEA.
WEBES/SEA (System Event Analyzer)
It is in your storage environment.
For more information, see Installing SNMP.
SNMP Service
It runs on the E5000/X5000 blade servers.
For more information, see Installing WMI.
WMI Service
NOTE:
Installation will require permission of an administrator. User should be logged in as a member of
Local Administrator or Domain Administrator Group.
Installing OpsMgr 2007
You must install and configure OpsMgr 2007 before installing the HP Storage Management Pack.
To download OpsMgr 2007, visit the following website:
http://www.microsoft.com/systemcenter/opsmgr/
Installing SNMP
To enable event flow to OpsMgr 2007 through SNMP, you must install the SNMP Trap Catcher
Service on the system or systems you have chosen to be your SNMP collection points. A collection
point can be the same system on which your OpsMgr 2007 Management software is installed.
Figure 2 shows the flow of events using SNMP.
SNMP Support Matrix
You must first install SNMP if you have the following software installed in your environment:
• HP Storage Modular Storage Arrays 1000, 1500, 1500i, and P2000
• HP Storage Enterprise Virtual Array 3x00, 4x00, 5x00, 6x00, 8x00, and HP EVA Device Man-
agement Software
Installing Management Pack16