HP StorageWorks Management Pack for System Center Operations Manager 2007 Installation and User Guide

13. Check the Monitoring pane, as shown in Figure 20.
Figure 20 Monitoring Console
.
Configuring the Management Pack for Processing SNMP
Events\Alerts
If the HP Storage Management Pack is imported into OpsMgr 2007 to receive traps from the devices
to OpsMgr 2007, complete the following steps:
NOTE:
To receive events and alerts through SNMP for XP, VA, P2000/MSA, TapeStorage, B-series Switches,
P4000 arrays, and HP 3PAR Storage system, configure the HP Storage Management Pack to process
the SNMP events and alerts. This option is disabled by default and requires manual creation of an
Override Rule in the OpsMgr. The SNMP Trap Catcher Rule is disabled by default.
This step is not required if a newer version of HP Storage Management Pack is imported on top of
an earlier version of HP Storage Mangement Pack.
1. Open the OpsMgr console.
2. Click the Authoring tab to display the Authoring console. In the Authoring console, click Rules.
3. In the Rules window, search for HP Storage Trap Catcher rule using the Look for: search bar.
HP Storage Management Pack for System Center User Guide 39