HP StorageWorks Management Pack for System Center Operations Manager 2007 Installation and User Guide

8. Click Security and select Accept SNMP Packets from any hosts. Figure 22 displays the SNMP
Service Properties window.
Figure 22 Allowing SNMP to accept hosts
.
9. Click Add.
10. Enter the HP Command View hosts name you want to monitor, and click Add. Figure 23 displays
SNMP Service Configuration dialog box.
Figure 23 Supplying host information to SNMP
.
11. Configure the SNMP trap generator on the HP Command View server.
12. Configure the HP Command View storage environment hosts to send the SNMP traps to the
OpsMgr 2007 server.
HP Storage Management Pack for System Center User Guide 45