HP StorageWorks Management Pack for System Center Operations Manager 2007 Installation and User Guide

• Community String: Plain-text community string or password required by SNMP clients to read or
write SNMP MIB values.
Adding an SNMP Trap
To add a new SNMP trap entry:
1. If necessary, obtain the required network settings from your network administrator.
2. In the Library window, click Configuration tab.
3. In the left panel, select SNMP Alerts.
The current SNMP traps appear in the right panel.
4. Do one of the following:
• In the right panel, right-click an SNMP trap, and select Add Trap Entry.
• Select Actions > Add Trap Entry.
The SNMP Trap Entry dialog box appears.
5. Enter the Trap Destination and Community String, and click OK.
Editing an SNMP Trap
To edit an existing trap entry:
1. In the Library window, click Configuration tab.
2. In the left panel, select SNMP Alerts.
The current SNMP traps appear in the right panel.
3. Do one of the following:
• In the right panel, double-click a trap entry.
• In the right panel, right-click a trap entry, and then select Edit Trap Entry.
• In the right panel, select the trap entry to be modified, and then select Actions > Edit Trap
Entry.
The SNMP Trap Entry dialog box appears.
4. Modify the Trap Destination and Community String as necessary, and click OK.
Removing an SNMP Trap
To remove an existing trap entry:
1. In the Library window, click Configuration tab.
2. In the left panel, click SNMP Alerts.
The current SNMP traps appear in the right panel.
3. Do one of the following:
• In the right panel, right-click the trap entry that you want to remove, and then select Remove
Trap Entry.
• In the right panel, select the trap entry that you want to remove, and then select Actions >
Remove Trap Entry.
4. Confirm that you want to delete the SNMP trap.
Configuration for monitoring device52