HP StorageWorks Management Pack for System Center Operations Manager 2007 Installation and User Guide

5. Right-click on a rule and select Override > Override the Object Discovery > For all objects of the
class Windows.
Figure 47 Override Properties
.
NOTE:
Enabling one rule will automatically enable the other two rules.
6. Select the Enable checkbox and set the Override Value to True.
NOTE:
By default, the Override value is set to 300 seconds, where the rule takes 300 seconds to
apply. Also, the Diagram View will refresh every 300 seconds. You can specify a minimum
of 50 seconds or a maximum of 300 seconds as the override value.
For example, if you change the override value to 120 seconds then the rule will take 120
seconds to apply and the Diagram View will refresh every 120 seconds.
In case you change the Override Value, navigate to the last option
select on destination Management Pack on the page and Click New.
Type a name for the management pack and click Save.
7. Click OK.
Using the Management Pack software80