HP StorageWorks File Migration Agent V2.1 administrator guide (T4274-96105, October 2006)

110 Best practices
FMA RSA-FTP Configuration dialog
Figure 95 Rsa Configuration dialog—RSA-FTP
For archiving data directly to c:\fsefs1, the root path of the FMA RSA-FTP configuration menu needs to
be left blank.
Verification of the GDS FTP-Server configuration can be done with any FTP client software.
After the FTP server side has been tested successfully, the next step is to attach FMA as an FTP client to the
new archive storage location. For this, the following actions are necessary:
1. Start FMA MMC Snap-In from Windows Start menu.
(Start > Programs > HP StorageWorks File Migration Agent > FMA Configuration)
2. Select the Archives item.
3. Start the context menu and select the item New. A new dialog will pop up.
4. Enter the name for the new archive. The archive name must be unique.
5. Select RSA-FTP as RSA module.
6. Enter the performance index. The smaller the index, the higher the priority.
7. Enter an archive description.
8. Click the OK button. A new dialog will pop up.
9. Enter the following settings corresponding to your requirements:
Host or IP address (primary and secondary host)
•Port (default: 21)
•User
•Password
Root path
•FTP server
Connection timeout in ms
Data read timeout in ms