HP StorageWorks File Migration Agent V2.1 administrator guide (T4274-96105, October 2006)

File Migration Agent administrator guide 39
2. Right-click in the white space to display the context menu.
Figure 27 Context menu for defining FMA archives
3. Select New archive in the context menu.
The Archive Properties dialog appears.
Figure 28 Archive Properties dialog
4. Enter the following values for the new archive.
NOTE: If you have changed the RSA configuration, you need to restart the File Migration Agent service to
activate the new configuration.
Changing the RSA configuration may lead to inaccessible archive data.
5. Click the OK button to display the RSA configuration dialog. Each RSA module has implemented its
specific configuration dialog.
For further information about the RSA configuration, see page 40.
Table 2 Archive Properties dialog
Setting Description
Archive name: Name of the archive definition. This name is used as a reference to this archive in FMA
for migration and recall operations.
Archive ID: Internal reference of this archive. This number is generated and has to be unique. It is not
possible to change this value.
If stubfiles are to be moved between systems, the archive ID must be unique across all
systems.
RSA Module: The module depends on the type of archive. The available modules are:
• RSA-CIFS (RsaCIFS.dll)
• RSA-FTP (RsaFTP.dll)
• RSA-RISS (RsaRISS.dll)
The module corresponds with the RSA (remote storage adapter). For further information,
see ”Configure backend archives” on page 38.
Performance index: Priority for recalls. The smaller the index, the higher the priority (default: 100).
Description: Free text comment for this archive.