HP StorageWorks File Migration Agent V2.1 administrator guide (T4274-96105, October 2006)

File Migration Agent administrator guide 41
IMPORTANT: Ensure that NTFS folder permissions and share permissions are configured correctly on the
shared archive folder to avoid “ACCESS_DENIED” errors.
1. Share Permissions:
Click the Sharing tab on the folders property page and click the Permissions button to set permissions
for the FMA user, who accesses this folder over the network.
Figure 31 Data Properties (Sharing) dialog
Ignore system name ... : If this option is selected, the system name will not be used to generate a
storage descriptor in the archive storage. If this option is off, the system name
will be used to create a storage descriptor.
For further information about this option, see page 45.
NOTE: You should only use this option when you can be sure that the storage
descriptor without the system name is unique.
Ignore volume serial ... : If this option is selected, the volume serial number of the local file system will
not be used to generate a storage descriptor in the archive storage. If this
option is off, the volume serial will be used to create a storage descriptor.
For further information about this option, see page 45.
NOTE: You should only use this option when you can be sure that the storage
descriptor without the volume serial is unique.
NOTE: All values will be used for the primary and the secondary CIFS archive.
1. This option was introduced for SAMBA installations and is not recommended for a normal NAS device.
Table 3 Rsa Configuration dialog—RSA-CIFS (continued)
Setting Description