HP StorageWorks File Migration Agent V2.1 administrator guide (T4274-96105, October 2006)

44 Configuration
NOTE: All values will be used for the primary and the secondary FTP archive.
For further information about the FTP backend configuration, see page 129.
RSA-RISS
Figure 35 Rsa Configuration dialog—RSA-RISS
Ignore system name ... : If this option is selected, the system name will not be used to generate a
storage descriptor in the archive storage. If this option is off, the system name
will be used to create a storage descriptor.
For further information about this option, see page 45.
NOTE: You should only use this option when you can be sure that the storage
descriptor without the system name is unique.
Ignore volume serial ... : If this option is selected, the volume serial number of the local file system will
not be used to generate a storage descriptor in the archive storage. If this
option is off, the volume serial will be used to create a storage descriptor.
For further information about this option, see page 45.
NOTE: You should only use this option when you can be sure that the storage
descriptor without the volume serial is unique.
Table 5 Rsa Configuration dialog—RSA-RISS
Setting Description
Primary RISS: Hostname or IP address of the primary RISS.
Secondary RISS: Hostname or IP address of the secondary RISS.
Domain: RISS domain the data goes to.
Table 4 Rsa Configuration dialog—RSA-FTP (continued)
Setting Description