HP StorageWorks File Migration Agent V2.1 administrator guide (T4274-96105, October 2006)

70 Operating
Following commands of the FMA command line interface (FMACLI) are supported:
Table 13 Supported FMACLI commands
command Act[ivate] Repair metadata file IDs after restore from a backup. For further
information, see page 71.
Arc[hive] This command is needed for the archive management. For further
information, see page 73.
Cle[anup] This command reorganizes FMA archives. For further information, see
page 75.
Era[se] This command deletes FMA metadata. For further information, see
page 76.
Find This command find files and creates a file list. For further information
see page 78.
Inf[o] Display FMA metadata. For further information, see page 79.
Mig[rate] Explicitly migrate a file to the specified archive. For further information,
see page 83.
Pol[icy] Display or execute a file policy. For further information see page 85.
Rec[all] Explicitly recall data for a migrated file. For further information, see
page 86.
Rel[ease] Explicitly release data for a file. For further information, see page 89.
RSA This command is needed for the RSA management. For further
information, see page 93.
Sys[tem] This command is needed for the system management. For further
information, see page 94.
Ver[ify] Display the result of the verification process. For further information, see
page 95.
Vers[ion] Displays FMA version and build information. For further information see
page 98.
Vol[ume] This command is needed for the volume management. For further
information, see page 98.