HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

Configuring SAN products and fabrics102
Displaying routes between ports
You can view the path that Fibre Channel frames must take between two ports in a multiswitch
fabric. More than one route shows at a time within the same fabric. If you attempt to show a
different route within the same fabric, the previous route fades.
Before you display the route between two ports, ensure that:
• The fabric consists solely of HP M-series products.
• All switches or directors in the route are managed by the HAFM application and attached to the
same appliance.
• All switches or directors in the route are attached to the same appliance.
• All switches or directors in the route are Director 2/64, Director 2/140, Edge Switch 2/32,
Edge Switch 2/16, or Edge Switch 2/24 models and are running firmware 1.3 or higher.
• All attached products in the route are in the same zone.
To show the route for two ports:
1. In the Product List, click the plus (+) symbol next to the switch product icon you want to expand.
2. Right-click a node and select Show Route.
The Show Route dialog box is displayed (Figure 54).
Figure 54 Show Route dialog box
3. Select a destination port from the Destination Port list.
4. Click OK.