HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

Optional HAFM features150
Deleting devices
To delete planned devices, right-click the planned device icon on the Physical Map and select
Delete.
Displaying a planned device as an installed device
Right-click a planned device icon on the Physical map and select Planned Device.
• If the Planned Device option is selected, the device icon is displayed inside an icon box.
• If the option is not selected, the device icon is displayed without a box.
Editing port types
To arrange devices and edit a planned device’s port types:
NOTE: You can perform this task only in the Planning window.
1. Select View > Planned SAN from the Planning window menu.
2. Add devices as necessary.
3. Rearrange devices as necessary.
4. Connect the devices.
5. Right-click a planned device icon and select Ports to view the device’s ports.
6. Click the black arrow next to the port number.
The Port Properties dialog box is displayed (Figure 96).
Figure 96 Port Properties dialog box
7. Enter a port number in the Port Number field.
8. Select a port type from the Port Type list (available only for multiport devices).
9. Click OK.
10. Optionally, right-click a planned device icon and select Planned Device.
The device changes from a planned device to an implemented device.
Configuring ports
You can configure port numbers and types for planned devices.
NOTE: To configure planned ports, planned devices must be connected.
1. Right-click a planned device icon on the Physical Map and select Ports.