HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 151
2. Click the small triangle next to the port number.
The Port Properties dialog box is displayed (Figure 96).
3. Enter a number in the Port Number field.
4. Select a port type from the Port Type list.
5. Click OK.
Planning rules
This section describes how to use planning rules to evaluate a plan.
Planning rules specify criteria for a plan evaluation. Rules are stored in the text file
Install_Home\Server\Config\Other\rules.dat. You can open the rules.dat file
using any text editor.
Planning rules syntax and format
Planning rules must follow a certain syntax and format. Table 19 describes the planning rule
parameters.
NOTE: You must be an advanced user with administrator privileges to edit planning rules.
The following example shows the syntax for a planning rule:
set rule_id = SAN_1
where rule = “check_for_valid IPAddress for (device=switch or device=hub or
device=bridge)”
and description = “valid IP addresses must be specified for all switches,
hubs and bridges”
and headline = “Valid IP must be specified/property validation”
and errormssg = “The device labeled {0} has invalid IP address”
and remedy = “Please specify a valid IP address”;