HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 191
Adding a connected device without a CHAP Secret to a switch
1. Select a device in the Port Authenticated Devices table.
2. Click the right arrow.
The Add User dialog box is displayed.
Changing a CHAP Secret for a connected device
1. Select a connected device from the Authenticated Devices list and click Edit.
The Change Secret dialog box is displayed
2. Click OK.
3. The CHAP Secret for the device is changed inside the local database, and in the current
switch’s Authenticated Devices list.
Removing a connected device from a switch
1. Select a connected device from the Authenticated Devices list.
2. Click Remove.
Changing a CHAP Secret for a detached device
1. Select a device and click Edit.
The Add User dialog box is displayed.
2. Click OK and the CHAP Secret for the device is updated in the current local database for the
switch. This device is not actively authenticating with the current switch, so the CHAP Secret
needs to be changed for this device locally and for other affected devices.
Removing a detached device from a switch
1. Select a detached device and click Remove.
The detached device is not actively authenticating with the current switch, so it is removed.
Enabling or disabling E_Port and N_Port authentication
Select or clear the check box for E_Port or N_Port authentication.
The port authentication state overrides the E_Port and N_Port authentication at the switch level.
Changing the Enable Authentication method
Select an option from the Enable Authentication Method list for E_Port or N_Port.
• If the Radius Only option is selected, and E_Port or N_Port authentication is enabled, the
application checks to see if the RADIUS server settings on the Radius tab have been set.
• If not, the Radius Only and Radius then Local options do not display on the list.
Changing the port authentication state for an authenticated device
1. Select a device and choose a different port authentication state.
If the device is already in the authenticated device list, changing the port authentication state
can occur.