HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 223
Cannot modify product. The selected product
cannot be modified.
Verify the HAFM appliance-to-
product link is up. If the link is up:
The HAFM appliance can be
busy.
Another Element Manager
instance can be open.
You cannot have permission to
modify the product.
Cannot perform
operation. Fabric is
unknown.
This message is displayed
if no switches in the fabric
are connected to the
HAFM appliance.
Ensure at least one fabric-attached
switch or director has an Ethernet
connection to the HAFM appliance
and retry the operation.
Cannot perform
operation. The list of
attached nodes is
unavailable.
This message is displayed
when attached nodes are
unavailable and you
attempt to modify a zone
or create a new zone.
Verify an attached node is
available and retry the operation.
Cannot retrieve current
SNMP configuration.
The current SNMP
configuration could not
be retrieved.
Try again. If the problem persists,
contact the next level of support.
Cannot save current
SNMP configuration.
The current SNMP
configuration could not
be saved.
Try again. If the problem persists,
contact the next level of support.
Cannot set write
authorization without
defining a community
name.
An SNMP community
name has not been
configured.
Enter a valid community name in
the Configure SNMP dialog box.
Cannot show zoning
library. No fabric exists.
You cannot show the
zoning library if no fabric
exists. You must have
identified a switch or
director to the HAFM
application for a fabric to
exist.
Identify an existing switch or
director to the HAFM application
using the New Product dialog box.
Click OK to remove all
contents from log.
This action deletes all
contents from the selected
log.
Click OK to delete the log contents
or Cancel to cancel the operation.
Connection to
management server lost.
The connection to the
remote HAFM appliance
has been lost.
Log in to the HAFM appliance
again through the HAFM Log In
dialog box.
Table 29 HAFM messages (continued)
Message Description Action