HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

Informational and error messages226
Error removing zone or
zone member.
The HAFM application
encountered an internal
error.
Try the operation again. If the
problem persists, contact the next
level of support.
Error transferring files
<message>.
An error occurred while
transferring files from the
PC hard drive to the
HAFM application. The
message varies,
depending on the
problem.
Try the file transfer operation
again. If the problem persists,
contact the next level of support.
Fabric Log will be lost
once the fabric unpersists.
Do you want to continue?
When you unpersist a
fabric, the corresponding
fabric log is deleted.
Click Yes to unpersist the fabric or
No to cancel the operation.
Fabric member could not
be found.
A fabric member does not
exist when the application
prepared to find a route,
find a route node, or
gather route information
on that fabric member.
Ensure the product is incorporated
into the fabric and retry the
operation. If the problem persists,
contact the next level of support.
Fabric not persisted. You attempted to refresh
or clear the log, after a
fabric was unpersisted.
When you unpersist a
fabric, the corresponding
fabric log is deleted.
Click OK to continue. Ensure the
fabric is persisted before
attempting to refresh or clear the
Fabric Log.
Field cannot be blank. The data field requires an
entry and cannot be left
blank.
Enter appropriate information in
the data field.
File transfer aborted. You aborted the file
transfer process.
Verify the file transfer is to be
aborted, then click OK to continue.
HAFM error <error
number 1 through 8 >.
The HAFM application
encountered an internal
error (1 through 8
inclusive) and cannot
continue operation.
Contact the next level of support to
report the problem.
Management server
could not log you on.
Verify your username and
password.
An incorrect username or
password (both case
sensitive) was used while
attempting to log in to the
HAFM application.
Verify the username and password
with the customer’s network
administrator and retry the
operation.
Table 29 HAFM messages (continued)
Message Description Action