HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

Informational and error messages228
Invalid request. Three conditions result in
this message:
You tried to add or
modify a product from
Product View and the
network address is
already in use. (Network
addresses must be
unique.)
You tried to create a new
user with a username that
already exists. (A
username must be
unique.)
You tried to delete the
default Administrator
user. (The default
Administrator user cannot
be deleted.)
Choose the action that is
appropriate to the activity that
caused the error:
Network address: Specify a unique
network address for the product.
username: Specify a unique
username for the new user ID.
Do not delete the default
Administrator user.
Invalid UDP port number. The specified user
datagram protocol (UDP)
port number is invalid.
The number must be an
integer from 1 through
65535 inclusive.
Verify and enter a valid UDP port
number.
Invalid World Wide
Name.
The specified WWN
format is invalid. The
valid format is eight
two-digit hexadecimal
numbers separated by
colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Enter a WWN using the correct
format.
Invalid World Wide
Name or nickname.
The WWN or nickname
that you have specified is
invalid. The valid format
for the WWN is eight
two-digit hexadecimal
numbers separated by
colons (xx:xx:xx:xx:xx:
xx:xx:xx). The valid
format for a nickname is
non blank characters, up
to 32 characters.
Try the operation again using a
valid WWN or nickname.
Table 29 HAFM messages (continued)
Message Description Action